麻豆久久一区I欧美久久久久久久久久I超碰在线91I日韩有码专区I国产五月婷I日韩三级精品I黄色免费在线看I精品国产片

Precision metal stampingThere is a difference between simple and complex machined parts, and for the production of complex parts, it is necessary to set a demolding slope to ensure that the material can detach from the cutting edge in a timely manner, especially in the case of high-speed stamping. This setting is even more important. For problems that arise in demand, regardless of the planned settings, as long as they exist, they are reasonable. Improving mold planning will help improve product production efficiency, shorten delivery cycles, and increase capacity utilization. Experienced engineers always raise questions first, analyze them, and finally find solutions. So dealing with the problem of asymptotic slope in the problem is a good way to accumulate experience.

1. From the initial processing of metal mold cutting, it can be seen that metal molds with demolding slopes have more advantages than ordinary molds. Precision metal stamping parts need to be removed as quickly as possible during the rapid cutting process. In addition to the assistance of stamping oil, a certain degree of in mold slope coordination is also required, especially for the production of hundreds of thousands of stamping parts. Accurately grasping the delivery cycle is particularly important. Therefore, at the beginning of mold planning, every detail must be handled properly, which achieves the combination of efficiency and quality.

2. Check the assembly of sheet metal processing parts. After the completion of the delamination slope planning, it should be installed on the punch press for product testing. The precision metal stamping processing samples and fixed sheet metal processing parts should be assembled to meet the specifications before being arranged on the mass production line. The above processes have laid the foundation for ensuring the quality of precision metal stamping parts. For example, the popular 5G industry at present has strict requirements for the quality of base stations, with a large area to be laid in a short period of time. Therefore, various provinces and cities are competing to lay them. At this time, the demand for advanced equipment and power supply is so high that the demand for hardware molds will also increase from a point of view. Therefore, planning the demolding slope is essential.